| The correct paper type is not specified in the software or printer driver.
|
|
| Verify that the correct paper type is selected in the software or printer driver.
|
|
| The input tray is overfilled.
|
|
| Remove excess paper from the input tray. Do not exceed the maximum stack height marks for the tray.
|
|
| Paper in another input tray is the same size as the transparencies, and the product is defaulting to the other tray.
|
|
| Make sure that the input tray containing the transparencies or glossy paper is selected in the software program or printer driver. Use the product control panel to configure the tray to the paper type loaded.
|
|
| The tray containing the transparencies or glossy paper is not configured correctly for type.
|
|
| Make sure that the input tray containing the transparencies or glossy paper is selected in the software program or printer driver. Use the product control panel to configure the tray to the paper type loaded.
|
|
| Transparencies or glossy paper might not meet supported paper specifications.
|
|
| Use only paper that meets the HP paper specifications for this product.
|
|
| High-humidity environments may cause glossy paper not to feed, or to feed too many sheets.
|
|
| Avoid printing glossy paper in high humidity conditions. When printing glossy paper, removing the paper from the wrapper and letting it rest for a few hours can improve feeding into the product. However, letting paper rest in humid environments may also cause blisters.
|
|
