|
Manage and maintain the product
|
| English
|
|
|
Upgrade the HP Jetdirect firmware
|
The HP Jetdirect network interface in the product has firmware that can be upgraded separately from the product firmware. This procedure requires that you install HP Web Jetadmin Version 7.0 or later on your computer. See Use HP Web Jetadmin software. Complete the following steps to update the HP Jetdirect firmware by using HP Web Jetadmin.
| 1.
|
| Open the HP Web Jetadmin program.
|
|
| 2.
|
| Open the Device Management folder in the drop-down list in the Navigation panel. Navigate to the Device Lists folder.
|
|
| 3.
|
| Select the product that you want to update.
|
|
| 4.
|
| In the Device Tools drop-down list, select the Jetdirect Firmware Update option.
|
|
| 5.
|
| Under the Jetdirect Firmware Version heading the HP Jetdirect model number and current firmware version are listed. Make a note of these.
|
|
| 6.
|
|
| 7.
|
| Scroll down to the list of HP Jetdirect model numbers, and find the model number you wrote down.
|
|
| 8.
|
| Look at the current firmware version for the model, and see if it is later than the version you wrote down. If it is, right-click on the firmware link, and follow the instructions on the Web page to download the new firmware file. The file must be saved into the <drive>:PROGRAM FILESHP WEB JETADMINDOCPLUGINSHPWJAFIRMWAREJETDIRECT folder on the computer that is running the HP Web Jetadmin software.
|
|
| 9.
|
| In HP Web Jetadmin, return to the main product list and select the digital sender again.
|
|
| 10.
|
| In the Device Tools drop-down list, select the Jetdirect Firmware Update option again.
|
|
| 11.
|
| On the HP Jetdirect firmware page, the new firmware version is listed under the Jetdirect Firmware Available on HP Web Jetadmin heading. Click the Update Firmware Now button to update the Jetdirect firmware.
|
|
| © Hewlett-Packard Development Company, L.P
|
HP Laserjet P3010 Upgrade the HP Jetdirect firmware
