| 1.
|
| Take note of the IP address on the HP Jetdirect page. The HP Jetdirect page is the second page that prints when you print the configuration page.
|
| NOTE:
|
Before upgrading the firmware, make sure that any error messages are cleared from the control-panel display.
|
|
| 2.
|
| Click Start, click Run, and then type cmd to open the command window.
|
|
| 3.
|
|
| 4.
|
| Go to the folder where the firmware file is stored.
|
|
| 5.
|
| Press Enter on the keyboard.
|
|
| 6.
|
| When prompted for the user name, press Enter.
|
|
| 7.
|
| When prompted for the password, press Enter.
|
|
| 8.
|
| Type bin at the command prompt.
|
|
| 9.
|
| Press Enter. The message 200 Types set to I, Using binary mode to transfer files appears in the command window.
|
|
| 10.
|
| Type put and then the file name. For example, if the file name is ljp3015.rfu, type put ljp3015.rfu.
|
|
| 11.
|
| The download process begins and the firmware is updated on the product. This can take several minutes. Let the process finish without further interaction with the product or computer.
|
|
| NOTE:
|
The product automatically turns off and then on again after processing the upgrade.
|
|
| 12.
|
| At the command prompt, type bye to exit the ftp command.
|
|
| 13.
|
| At the command prompt, type exit to return to the Windows interface.
|
|
