Install EIO cards

HP Laserjet P3010 hp logo Install EIO cards

Manage and maintain the product

English

Install EIO cards

Install an EIO card
1.
Turn off the product.
2.
Remove the two screws and cover plate from the EIO slot on the back of the product.

HP Laserjet P3010 nhu eio cover remove Install EIO cards

3.
Install the EIO card in the EIO slot and tighten the screws.

HP Laserjet P3010 nhu eio install Install EIO cards

4.
If the EIO card requires a cable connection, connect the cable.

HP Laserjet P3010 nhu eio connect Install EIO cards

5.
Turn on the product, and then print a configuration page to verify that the new EIO card is recognized. See Print the information and show-me-how pages.
HP Laserjet P3010 note Install EIO cards NOTE:

When you print a configuration page, an HP Jetdirect configuration page that contains network configuration and status information also prints.

Remove an EIO card
1.
Turn off the product.
2.
Disconnect any cables from the EIO card.
3.
Loosen the two screws from the EIO card, and then remove the EIO card from the EIO slot.
4.
Place the cover plate from the EIO slot onto the back of the product. Insert and tighten the two screws.
5.
Turn on the product.

© Hewlett-Packard Development Company, L.P
HP Laserjet P3010 Install EIO cards