|
Control panel
|
| English
|
These settings affect only jobs without identified properties. Most jobs identify all of the properties and override the values set from this menu.
To display: Press the Menu button 
, select the CONFIGURE DEVICE menu, and then select the PRINTING menu.
| NOTE:
|
Values that have an asterisk (*) are the factory-default values. Some menu items have no default.
|
|
|
|
|
|
|
|
| Set the default number of copies for print jobs. The default number is 1.
|
|
|
|
| A list of available sizes appears.
|
|
| Set the default paper size.
|
|
| DEFAULT CUSTOM PAPER SIZE
|
|
|
| Set the default size for any custom print job.
|
|
|
|
|
| Enable or disable two-sided printing.
|
|
| NOTE:
|
This menu is available only on the d, dn, and x models.
|
|
|
|
|
| Change the binding edge for two-sided printing.
|
|
| NOTE:
|
This menu is available only on the d, dn, and x models.
|
|
|
|
|
| Set the product to print an A4 job on letter-size paper when no A4 paper is loaded.
|
|
|
|
|
| Makes the MANUAL FEED setting the default for jobs that do not select a tray.
|
|
|
|
|
| Change the printable area of Letter and A4-size paper to 2 mm from the left and right edges for single-sided printing. The standard printable area is 4 mm from the left and right edges.
|
|
|
|
|
| Select a version of the Courier font.
|
| The DARK setting is an internal Courier font available on HP LaserJet Series III printers and older.
|
|
|
|
|
| Change the printable area of A4 paper.
|
| NO: The printable area is seventy-eight 10-pitch characters on a single line.
|
| YES: The printable area is eighty 10-pitch characters on a single line.
|
|
|
|
|
|
|
|
|
|
This section provides information about the following topics:
| © Hewlett-Packard Development Company, L.P
|
HP Laserjet P3010 Printing menu