|
|
|
|
|
| For each tray, setting the registration shifts the margin alignment to center the image on the page from top to bottom and from left to right. You can also align the image on the front with the image printed on the back.
|
|
|
|
|
|
| Shift from -20 to 20 along the X or Y axes. 0 is the default.
|
|
| Print a test page and perform the alignment procedure for each tray.
|
| When it creates an image, the product scans across the page from side to side as the sheet feeds from top to bottom into the product.
|
| The scan direction is referred to as X. X1 is the scan direction for a single-sided page or for the first side of a two-sided page. X2 is the scan direction for the second side of a two-sided page.
|
| The feed direction is referred to as Y. Y1 is the feed direction for a single-sided page or for the first side of a two-sided page. Y2 is the feed direction for the second side of a two-sided page.
|
|
|
|
| A list of paper types displays.
|
|
|
|
| Each paper type has a default fuser mode. Change the fuser mode only if you are experiencing problems printing on certain paper types. After you select a type of paper, you can select a fuser mode that is available for that type.
|
|
|
|
|
|
| Return all fuser-mode settings to the factory-default settings.
|
|
|
|
|
|
|
| Optimize various print modes to solve print-quality issues.
|
|
|
|
|
|
| Return all the settings in the OPTIMIZE menu to the factory-default values.
|
|
|
|
|
|
|
| Sets the resolution at which the product prints.
|
| 300: Produces draft print quality.
|
| 600: Produces high print quality for text.
|
| FASTRES 1200: Produces 1200-dpi print quality for fast, high-quality printing of business text and graphics.
|
| PRORES 1200: Produces 1200-dpi print quality for fast, high-quality printing of line art and graphic images.
|
|
|
|
|
|
|
| Use the Resolution Enhancement technology (REt) setting to produce print with smooth angles, curves, and edges.
|
| REt does not affect print quality if the resolution is set to the FASTRES 1200 or PRORES 1200 settings. All other print resolutions benefit from REt.
|
|
|
|
|
|
|
| EconoMode is a feature that allows the product to use less toner per page. Selecting this option extends the life of the toner supply and might reduce the cost per page. However, it also reduces print quality. The printed page is adequate for printing drafts.
|
| HP does not recommend full-time use of EconoMode. If EconoMode is used full-time, the toner supply might outlast the mechanical parts in the print cartridge. If print quality begins to degrade under these circumstances, you will need to install a new print cartridge, even if there is toner supply remaining in the cartridge.
|
|
|
|
|
|
|
| Lighten or darken the print on the page. The lightest setting is 1, and the darkest setting is 5. The default setting of 3 usually produces the best results.
|
|
|
|
|
|
|
| When auto-cleaning is on, the product prints a cleaning page when the page count reaches the CLEANING INTERVAL setting.
|
|
|
|
|
|
|
| When AUTO CLEANING is on, this option specifies the number of pages that are printed before a cleaning page is automatically printed.
|
|
|
|
|
|
|
| When AUTO CLEANING is on, this option specifies the paper size that is used to print the cleaning page.
|
|
|
|
|
|
|
| Prints a page of instructions for cleaning excess toner off the pressure roller in the fuser.
|
| NOTE:
|
This option is available only for the HP LaserJet P3011 printer, the HP LaserJet P3015 printer, and the HP LaserJet P3015n printer.
|
|
|
|
|
|
|
| Create and process a cleaning page for cleaning the pressure roller in the fuser. When the cleaning process runs, a cleaning page is printed. This page can be discarded.
|
|
, select the CONFIGURE DEVICE menu, and then select the PRINT QUALITY menu.